Jump to content

Recommended Posts

Posted

My favorite for a page tone is,

 

 

Gain- 4.5

 

Bass- 7.5

 

Middle- 8

 

Treble- 7.5

 

Presence- 8

 

Tilt/Contour/ High Low Adjustment- 7.5

 

 

This is my opinion on the tone...   

 

Posted (edited)
2 hours ago, Paimonus Rex said:

What actual amp/cab or simulator are you using?

These are opinions, not amp settings!  He said so.
Scores out of 10 I guess.... 😉


I mean, if you're going to give people amp settings for Jimmy first you've got to specify:

Is it live tone, or the tone used on an album for a specific song?

If it's live:

what year?
what amp? (WEM, Rickenbacker, Supro, Vox, Marshall, Petersberg, Orange, Fender, etc...)
what cabinets?  (are they open or close backed?  what speakers are in the cabs?)
is he using the Tonebender?
is he running the guitar through the echoplex first?
is he using the Pete Cornish board?

just for starters.....


 

Edited by woz70
Posted (edited)

For anybody wondering I use a Marshall Origin 50 Combo (basically a plexi) 

And A 2019 Gibson Les Paul Classic - Honey Burst

Effects-

Wampler Etheral Reverb + Delay

Settings= 

Reverb Mix= 2

Delay= 3

Delay Mix= 4

Feedback= 5

Tone= 9
 

Dunlop Wah Pedal


Fulltone OCD

Settings-

Volume= 5

Drive= 6.5

Tone= 9.5

 

Boss CE-2 Waza Craft Chorus

(I only use this sometimes...)

Settings=

 

Depth= 10

 

Rate= 3.5 - 4


 

Most of the time I’m playing Studio stuff so

i would say these settings are good for studio stuff 

 

 

 

 

 

 

 

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

Edited by JMGuitar
Posted
On 3/20/2020 at 2:05 PM, JMGuitar said:

For anybody wondering I use a Marshall Origin 50 Combo (basically a plexi) 

And A 2019 Gibson Les Paul Classic - Honey Burst

Effects-

Wampler Etheral Reverb + Delay

Settings= 

Reverb Mix= 2

Delay= 3

Delay Mix= 4

Feedback= 5

Tone= 9
 

Dunlop Wah Pedal


Fulltone OCD

Settings-

Volume= 5

Drive= 6.5

Tone= 9.5

 

Boss CE-2 Waza Craft Chorus

(I only use this sometimes...)

Settings=

 

Depth= 10

 

Rate= 3.5 - 4


 

Most of the time I’m playing Studio stuff so

i would say these settings are good for studio stuff 

 

 

 

 

 

 

 

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

God damn that is one beautiful guitar. The burst is really unique and the finish. Wow!

Posted

Hey JM!  That really is a very nice set up!  If you were to play Page tone without the pedals, would your Origin's e.q. (T, M,B) remain the same? Ahh, no pun intended.  I use an Orange Dark Terror with two Les Pauls and it only has a “shape” knob for its e.q.  I have that knob set so that the e.q. curve would most likely approximate what you have.  Myamp is similar (it just so happens) to your's.....just below half on the gain.  I don't think Page used much in the way of gain, but relied on sheer volume to make his “point”.  Perhaps his use of a Tele in the Yardbirds and early Zep influenced how he set e.q. on his amps with a Les Paul, later on.

 

ADK-Zeppy

 

  • 2 weeks later...
Posted

Hey, ADK - Zeppy 

Yes, well the amp has no drive in the amp but has a gain boost. So, if you just play it without pedals it’s clean.

Posted

Yeah, and I also have a strat so I can get some early zep stuff. But my les Paul has coil split and out of phase an in phase wiring. 
 

  • 2019 Les Paul Classic - Honeyburst
  • 2019 Squier Classic Vibe Strat - Two Tone Sunburst

 

 

 

5A04A0EB-9497-4298-B3D3-E311A05B8066.jpeg

DCFF6853-0492-4669-B6E0-322BCBCE2500.jpeg

FD3ED692-4049-47DE-B727-120B70D1190B.jpeg

Posted
On 3/20/2020 at 3:34 PM, woz70 said:

These are opinions, not amp settings!  He said so.
Scores out of 10 I guess.... 😉


I mean, if you're going to give people amp settings for Jimmy first you've got to specify:

Is it live tone, or the tone used on an album for a specific song?

If it's live:

what year?
what amp? (WEM, Rickenbacker, Supro, Vox, Marshall, Petersberg, Orange, Fender, etc...)
what cabinets?  (are they open or close backed?  what speakers are in the cabs?)
is he using the Tonebender?
is he running the guitar through the echoplex first?
is he using the Pete Cornish board?

just for starters.....


 

What this fine individual nicely stated, x2 ;)

Posted (edited)
On 3/20/2020 at 4:05 PM, JMGuitar said:

For anybody wondering I use a Marshall Origin 50 Combo (basically a plexi) 

And A 2019 Gibson Les Paul Classic - Honey Burst

Effects-

Wampler Etheral Reverb + Delay

Settings= 

Reverb Mix= 2

Delay= 3

Delay Mix= 4

Feedback= 5

Tone= 9
 

Dunlop Wah Pedal


Fulltone OCD

Settings-

Volume= 5

Drive= 6.5

Tone= 9.5

 

Boss CE-2 Waza Craft Chorus

(I only use this sometimes...)

Settings=

 

Depth= 10

 

Rate= 3.5 - 4


 

Most of the time I’m playing Studio stuff so

i would say these settings are good for studio stuff 

 

 

 

 

 

 

 

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

image.jpeg

Brother,

Really?  So this just was an excuse for posting gear porn? FOR SHAME!

 

Edited by Paimonus Rex

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...